Electrode Rinse Solution 1x20ml Sachet

Rinse your electrode with this solution between each measuring.
Removes contamination from the electrode providing you precise results.

pH 4.01 Buffer Solution 1 x 20ml Sachet

pH 7.01 Buffer Solution 1 x 20ml Sachet

pH 10.01 Buffer Solution 1 x 20ml Sachet

12.88 mS/CM buffer solution 1x20ml sachets

1,413μS/cm calibration solution 1x20ml sachet

1,382 ppm calibration solution 1x20ml sachet

1,500 ppm calibration solution 1x20ml sachet

Electrolyte Soution for Dissolved Oxygen (DO) Probe 30ml

Electrode refillable solution 3.5M KCl + AgCl, 30ml

Electrode refillable solution 3.5M KCl, 30ml for the AD1131B Refillable glass pH electrode (with double junction, 1 m cable and BNC connector)

Electrolyte solution for the AD8001/3 DO galvanic probe, 4x30ml
(AD630 DO meter)

Small hard carrying case (240 x 180 x 80 mm)
Suitable for the AD110; AD111; AD 310; AD410 Standard Professional Portable Meters.

Spare membranes with O-rings (5 pcs) for AD8001D/3 DO galvanic probe

230 VAC European adapter for bench meters with europlug (TYPE C)

120 VAC US adapter for bench meters with US plug (TYPE A)

240 VAC Australian adapter for bench meters with Australian 2 PIN plug (TYPE I)

230 VAC UK adapter for bench meters with UK plug (TYPE G)

Replaceable pH/Temp electrode for AD11 and AD12

Replaceable EC/TDS/Temp electrode for AD31 & AD32

Replaceable EC/TDS/Temp electrode for AD33 & AD35

Electrode Rinse Solution 230ml

pH 4.01 buffer solution 230ml

pH 7.01 buffer solution 230ml

pH 10.01 buffer solution 230ml

ORP test solution (200/275 mV), 230 ml
(Just for testing, not for calibration)

Electrode Storage Solution 230ml

12.88 mS/CM buffer solution 230ml

1413µS/CM buffer solution 230ml

1382 ppm buffer solution 230ml

84 µS/CM buffer solution 230ml

80,000 µS/CM buffer solution 230ml

111,800 µS/CM buffer solution 230ml

5000 µS/CM buffer solution 230ml

Zero oxygen solution, 230 ml

1,500 ppm TDS buffer solution 230ml

Electrode cleaning solution 230ml

Electrode refillable solution 3.5M KCl, 4x30ml for the AD1131B Refillable glass pH electrode (with double junction, 1m cable and BNC connector)

Hard carrying case (400 x 300 x 100 mm)
Suitable for the AD130; AD131; AD132; AD330; AD331; AD332; AD630 Professional Waterproof Portable Meters.

RS232 serial communication cable

Microprocessor based pH tester to assure to produce fast and stable readings.
They come with features such as automatic temperature compensation, low battery indication, automatic shut-off after 8 minutes and others. They are also incorporated with easy push buttons for automatic calibration and splashproof keypad that prevents water infiltration.

This pocket tester has an easy to read display and for the better resolution, also shows the full scale readout so to obtain the actual test values, provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. The built-in automatic temperature compensation feature ensures accurate readings under any ambient conditions. The splash-proof keypad prevents water infiltrations into the testers.

This pocket tester has an easy to read display and for the better resolution, also shows the full scale readout so to obtain the actual test values, provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. The built-in automatic temperature compensation feature ensures accurate readings under any ambient conditions. The splash-proof keypad prevents water infiltrations into the testers.

Easy to use, simple maintenance and yet high accuracy Conductivity pocket
testers for daily measuring purposes. With its built-in automatic temperature compensation feature, it ensures accurate readings under any ambient conditions.
Features such as splash-proof keypad prevent water infiltration into the testers,
easy to read display among others make the testers easy and simple to maintain but yet provide professional measurements. If calibration is necessary, simply submerge the electrode tip into the calibration solution and adjust the easily accessible trimmer on the side of the tester.

Easy to use, simple maintenance and yet high accuracy Conductivity pocket
testers for daily measuring purposes. With its built-in automatic temperature compensation feature, it ensures accurate readings under any ambient conditions.
Features such as splash-proof keypad prevent water infiltration into the testers,
easy to read display among others make the testers easy and simple to maintain but yet provide professional measurements. If calibration is necessary, simply submerge the electrode tip into the calibration solution and adjust the easily accessible trimmer on the side of the tester.

Epoxy pH electrode with double junction, 1 m cable and BNC connector

Plastic pH electrode with double junction, 2m cable and BNC connector

Microprocessor based pH tester to assure to produce fast and stable readings.
They come with features such as automatic temperature compensation, low battery indication, automatic shut-off after 8 minutes and others. They are also incorporated with easy push buttons for automatic calibration and splashproof keypad that prevents water infiltration.

The AD11 is a the most advanced microprocessor based Waterproof pH/Temp pocket testers in the market. This fast, stable and precise pocket tester is for users who require the greatest accuracy. The modular design allows replacing the electrode in a fast and simple way. Features such as stability indicator, automatic calibration, and automatic temperature compensation make this waterproof pocket tester a must-have in a variety of industries.

The AD31 is a waterproof Conductivity, TDS and temperature tester. The housing has been completely sealed against humidity. All Conductivity and TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in °C or °F units. The Conductivity/TDS conversion factor (CONV) can be selected by the user, as well as the coefficient ß (BETA) for temperature compensation. The instruments can be calibrated at one point. Measurements are highly accurate with a unique stability indicator right on the LCD. The models are also provided with a low battery symbol which warns the user to replace the batteries.

The AD32 is a waterproof Conductivity, TDS and temperature tester. The housing has been completely sealed against humidity. All Conductivity and TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in °C or °F units. The Conductivity/TDS conversion factor (CONV) can be selected by the user, as well as the coefficient ß (BETA) for temperature compensation. The instruments can be calibrated at one point. Measurements are highly accurate with a unique stability indicator right on the LCD. The models are also provided with a low battery symbol which warns the user to replace the batteries.

The AD33 is a waterproof Conductivity tester, that also measure and display temperature. The housing has been completely sealed against humidity. All Conductivity readings are automatically temperature compensated and temperature values can be displayed in °C or °F units. Conductivity calibration is automatic at one point, while temperature is factory calibrated and the user can perform an adjustment only. To prolong battery life, these models are provided with an auto-off feature that turns them off after 5 minutes of non-use. Moreover, when batteries become too weak to ensure reliable readings the meter automatically turns off.

The AD35 is a waterproof Conductivity tester, that also measure and display temperature. The housing has been completely sealed against humidity. All Conductivity readings are automatically temperature compensated and temperature values can be displayed in °C or °F units. Conductivity calibration is automatic at one point, while temperature is factory calibrated and the user can perform an adjustment only. To prolong battery life, these models are provided with an auto-off feature that turns them off after 5 minutes of non-use. Moreover, when batteries become too weak to ensure reliable readings the meter automatically turns off.

The AD12 is a the most advanced microprocessor based Waterproof pH/Temp pocket testers in the market. This fast, stable and precise pocket tester is for users who require the greatest accuracy. The modular design allows replacing the electrode in a fast and simple way. Features such as stability indicator, automatic calibration, and automatic temperature compensation make this waterproof pocket tester a must-have in a variety of industries.

Electrode rinse solution 25 pcs x 20ml sachets

Rinse your electrode with this solution between each measuring.
Removes contamination from the electrode providing you precise results.

pH 4.01 buffer solution 25 x 20ml Sachets

pH 7.01 Buffer Solution 25 x 20ml Sachets

pH 10.01 Buffer Solution 25 x 20ml Sachets

12.88 mS/CM buffer solution 25 pcs x 20ml sachets

1,413μS/cm calibration solution 25 pcs x 20ml sachets

1,382 ppm calibration solution 25 pcs x 20ml sachets

1,500 ppm calibration solution 25 pcs x 20ml sachets

Refillable glass pH electrode with double junction, 1 m cable and BNC connector

Conductivity probe with 2 m cable for ECO406

TDS probe with 2 m cable for ECO407 - without connector !

Stainless steel temperature probe with 1 meter cable. Supplied with bench and portable meters

Electrode holder for bench meters - is NOT INCLUDED with the AD3000 and AD8000 bench meters!

Replaceable pH/ORP/Temp electrode for the AD14 pocket tester.

4 ring stainless steel conductivity/TDS probe with 1 meter cable

The AD14 is designed for simultaneous pH, ORP and Temperature measurements. The large 2 row display (LCD) also has graphic symbols to guide you through
the operations. Calibration is performed automatically in 1 or 2 points.

Epoxy ORP platinum band electrode with single junction, 1 meter cable and BNC connector

Standard pH monitor for continuous measuring

Standard EC monitor for continuous measuring

Standard TDS monitor for continuous measuring

Application Software ONLY for AD1000; AD1020; AD132; AD332; AD630 Benchtop Meters and Waterproof Portable Meters.

The AD110 is a compact pH meter featuring automatic pH calibration, HOLD function, low battery indication, temperature measurement and compensation. In addition, AD111 can measure in the mV range.

The AD111 is a compact pH meter featuring automatic pH calibration, HOLD function, low battery indication, temperature measurement and compensation. In addition, AD111 can measure in the mV range.

The AD310 is a portable microprocessor-based instrument for
measuring EC or TDS, and temperature.

The AD410 is a portable microprocessor-based instrument for
measuring EC or TDS, and temperature.

Galvanic DO probe with built-in temperature sensor with 3 meter cable and DIN connector for the AD630 Professional Waterproof Portable DO Meter

The AD130 is a heavy-duty portable pH meter de-
signed to provide laboratory results and accuracy
even under harsh industrial conditions.

The AD331 is a waterproof portable meter that reads Conductivity in 5 ranges and temperature.

The AD131 is a heavy-duty portable waterproof meter for pH, ORP (Oxidation Reduction Potential) and temperature measurements, designed to provide laboratory results and accuracy even under harsh industrial conditions.

The AD330 is a waterproof portable meter that read TDS and Conductivity in 5 ranges and temperature.

The AD132 is a heavy-duty portable waterproof meter for pH, ORP (Oxidation Reduction Potential) and temperature measurements, designed to provide laboratory results and accuracy even under harsh industrial conditions.

The AD332 is a waterproof portable meter that read TDS and Conductivity in
5 ranges and temperature.

The AD1030 is a professional benchtop meter for pH,
ORP (Oxidation Reduction Potential), ISE (AD1200 only) and temperature
measurements. Relative mV readings are also provided.

The AD1040 is a professional benchtop meter for pH,
ORP (Oxidation Reduction Potential), ISE (AD1200 only) and temperature
measurements. Relative mV readings are also provided.

The AD1000 is a professional benchtop meter with ranges for pH,
ORP (Oxidation Reduction Potential), ISE [1020] and temperature measure-
ments. Relative mV readings are also provided.

The AD8000 is a microprocessor-based pH, ORP, conductivity, TDS,
and temperature benchtop meter.

The AD1200 is a professional benchtop meter for pH,
ORP (Oxidation Reduction Potential), ISE (AD1200 only) and temperature
measurements. Relative mV readings are also provided.

The AD1020 is a professional benchtop meter with ranges for pH,
ORP (Oxidation Reduction Potential), ISE [1020] and temperature measure-
ments. Relative mV readings are also provided.

The AD3000 is a microprocessor-based conductivity, TDS
and temperature meter.

The AD630 is a heavy-duty portable waterproof meter for DO (Dissolved Oxy-
gen) and temperature measurements, designed to provide laboratory results
and accuracy even under harsh industrial conditions.